Duratec 2.0 Map

Post maps up for others to get them going in the right direction. DISCLAIMER: USE AT YOUR OWN RISK. CONFIRM VALUES!
molecular bob
Posts: 35
Joined: Wed Feb 22, 2012 3:50 am
ECU Model: No ECU
Firmware Version: 31

Re: Duratec 2.0 Map

Post by molecular bob »

That might be Graham Blackwells map for his stock duratec on Caterham roller bodies, it used to be on his Zetec-Inside web page but I think it got lost in a rebuild. He sent it to me as a starting point for my very similar set up. It had the same name.

If it is his map it is for individual coil packs, not wasted spark and possibly non-standard injectors so you may need to mess with fueling.
katana
Posts: 455
Joined: Sun Jan 27, 2013 6:08 pm
ECU Model: S60 Pro
Firmware Version: 29

Re: Duratec 2.0 Map

Post by katana »

That could be true - lots of useful info on that site! I think I nicked his 'cold start mapping solution' LOL!
Post Reply