I have a DTA S40 pro and a newly rebuilt and upgraded S14 engine in my E30 BMW. I'm looking for a start map. Anyone?
BR,
Stefan
Start map for BMW S14 needed
-
- Posts: 602
- Joined: Fri Dec 04, 2009 1:45 am
- ECU Model: S80 Pro
- Distributor: DTA UK
- Firmware Version: 73
- Location: Pennsylvania, USA
- Contact:
Re: Start map for BMW S14 needed
You should actually be able to start that engine with most of an S50B30 engine map. Just change the crank angle and engine specifics to match. Its a 16v head so it is very similar to that of the M50/S50 24v units.
1992 700RWHP Pump Gas BMW
-
- Posts: 1622
- Joined: Fri Feb 28, 2014 1:03 pm
- ECU Model: S40 Pro
- Distributor: DTA
- Firmware Version: 79
Re: Start map for BMW S14 needed
The S14 doesn't have a usable crank trigger pattern. You will need to install one.
If you install a 36-1 crank trigger disc, the Ford Zetec map on the ECU should start the engine, as long as you adjust the Sensor Angle to match your install.
If you install a 36-1 crank trigger disc, the Ford Zetec map on the ECU should start the engine, as long as you adjust the Sensor Angle to match your install.
Re: Start map for BMW S14 needed
Thanks for the help. I'll try one of these two maps to start with.
/Stefan
/Stefan
Re: Start map for BMW S14 needed
Stefan,
I have complete maps from my S14 that will start and run your S14.
You'll still need to fine tune the maps to your set up, but you are welcome to the maps.
I was running a fully built 2.5 with cams, intake, big injectors....
Jeff
sprytel@sbcglobal.net
I have complete maps from my S14 that will start and run your S14.
You'll still need to fine tune the maps to your set up, but you are welcome to the maps.
I was running a fully built 2.5 with cams, intake, big injectors....
Jeff
sprytel@sbcglobal.net
NASA GTS5 #945
GTS5 Midwest Regional Champion '09, '11, '12 & '14
-
- Posts: 602
- Joined: Fri Dec 04, 2009 1:45 am
- ECU Model: S80 Pro
- Distributor: DTA UK
- Firmware Version: 73
- Location: Pennsylvania, USA
- Contact:
Re: Start map for BMW S14 needed
Jeff - can you post the maps? That way if users in the future need assistance they'll be available?
1992 700RWHP Pump Gas BMW
Re: Start map for BMW S14 needed
I don't see why not.....
attached
attached
- Attachments
-
- 060706.Map
- S14B25 - Schrick cams/CF intake/injectors/A-N. NOT for a stock S14!
- (21.46 KiB) Downloaded 4080 times
NASA GTS5 #945
GTS5 Midwest Regional Champion '09, '11, '12 & '14
Re: Start map for BMW S14 needed
Excellent! Thanks! Will use this one as my starting point.
-
- Posts: 602
- Joined: Fri Dec 04, 2009 1:45 am
- ECU Model: S80 Pro
- Distributor: DTA UK
- Firmware Version: 73
- Location: Pennsylvania, USA
- Contact:
Re: Start map for BMW S14 needed
Hey Jeff - noticed your start fueling map falls off hard over 104F - do you have any trouble starting the car hot? Just curious! Is this a map you actually race on/drive on or is it to get around and start from?
1992 700RWHP Pump Gas BMW