X16xe map

Post maps up for others to get them going in the right direction. DISCLAIMER: USE AT YOUR OWN RISK. CONFIRM VALUES!
Post Reply
Totalnova
Posts: 21
Joined: Sun Apr 29, 2018 7:04 am
ECU Model: S40 Pro

X16xe map

Post by Totalnova »

Anyone have any x16xe maps?
Standard engine running throttle bodies
Thanks in advance.
Nick
Totalnova
Posts: 21
Joined: Sun Apr 29, 2018 7:04 am
ECU Model: S40 Pro

Re: X16xe map

Post by Totalnova »

My email address is nickduncan2212@gmail.com if it makes it easier to send.
Thanks again
Totalnova
Posts: 21
Joined: Sun Apr 29, 2018 7:04 am
ECU Model: S40 Pro

Re: X16xe map

Post by Totalnova »

Anyone?
Rob Stevens
Posts: 1138
Joined: Thu Jul 28, 2011 4:10 am
ECU Model: S100 Pro
Distributor: None-Coil On Plug :)

Re: X16xe map

Post by Rob Stevens »

Just use the zetec map with appropriate crank sensor adjustments?
Alex DTA
Posts: 1491
Joined: Fri Feb 28, 2014 1:03 pm
ECU Model: S40 Pro
Distributor: DTA
Firmware Version: 79

Re: X16xe map

Post by Alex DTA »

There should be a 2L XE map with the software, which will have the correct crank angle.
Fuelling shouldn't be too far off either as yours will have smaller injectors.
Totalnova
Posts: 21
Joined: Sun Apr 29, 2018 7:04 am
ECU Model: S40 Pro

Re: X16xe map

Post by Totalnova »

I have 330cc injectors and I think c20xe use 220cc so mine are a little bigger.
I was hoping I would get lucky and get a decent map for a x16xe as I could use it for a base for my z18xe to build from as the x16xe is a lot more commonly used.
Alex DTA
Posts: 1491
Joined: Fri Feb 28, 2014 1:03 pm
ECU Model: S40 Pro
Distributor: DTA
Firmware Version: 79

Re: X16xe map

Post by Alex DTA »

I don't have any known good X16XE maps, but I do have a random one at the office.
Email office@dtafast.co.uk if you'd like a copy
Post Reply