Zetec Turbo Focus mk1 RS map needed

Post maps up for others to get them going in the right direction. DISCLAIMER: USE AT YOUR OWN RISK. CONFIRM VALUES!

Zetec Turbo Focus mk1 RS map needed

Postby Zoggon » Sun Jun 16, 2019 5:50 pm

Hello.

Does anyone have and would like to share a map for mk1 Focus RS (fuel and ignition map and maybe turbo settings)?
I'm looking for something close to standard settings to run own zetec rs turbo project.
Something for standard injectors (theese are 440cc I think), std. cams and standard boost pressure.

I would be grateful even for screenshots etc.

(I'm trying to run FRS mk1 engine in Sierra on DTA P8pro Ecu)
Thanks in advance for any help :!:
Zoggon
 
Posts: 14
Joined: Thu Sep 04, 2014 10:01 am
ECU Model: P8 Pro

Re: Zetec Turbo Focus mk1 RS map needed

Postby Alex DTA » Mon Jun 17, 2019 4:06 am

You can try the attached. it's for a 2L golf turbo on 440cc injectors, so should at least get you started. It has the correct trigger pattern and angles for a Zetec
Attachments
Zetec Turbo Base Map.map
(45.11 KiB) Downloaded 32 times
Alex DTA
 
Posts: 1259
Joined: Fri Feb 28, 2014 1:03 pm
ECU Model: S40 Pro
Distributor: DTA
Firmware Version: 79

Re: Zetec Turbo Focus mk1 RS map needed

Postby Zoggon » Mon Jun 17, 2019 4:17 am

Thank you very much Alex.
It will be very helpful :)
Zoggon
 
Posts: 14
Joined: Thu Sep 04, 2014 10:01 am
ECU Model: P8 Pro


Return to Shared Maps

Who is online

Users browsing this forum: No registered users and 3 guests

cron