DTAForum.com - a forum for the DTA ECU

so i'm not the only one with a high inlet temp.
Mine in now about 90-100 degrees with WM injection.

Without + 130

I use the Zeitronix system.
The ZT-2, it uses a bosch lambda sonde and there are since firmware v5x presets in the dta software.

Works great for me.
http://www.zeitronix.com/

Del,

That's a high CR for a charger engine..
I melted serveral pistons from my c20ne supercharged by an m62 from eaton.

what is your ait now?

I use a t-adapter. So 1 pump, line form the back to the front. T-adapter and then the 2 nozzle's. We use a boost sensor to switch on a relais. This relay powers on the pump. You have a little delay but you can adjust the boost sensor. How much HP do you have at this time (Cranck HP is good for me) M...

Well the other nozzle's after the charger are still there (they have taken out of action), but this where 90cc nozzle and much to small for the heat that the eaton m90 charger makes. So together with the tuner we decided to place them before the charger so the wm mix has enough time to cool down the...

Hi Del, no i don't have a charge cooler. The first plan was to mount one, but we have not enough space. Take a look @ the project sub forum for my build. Because the Corsa is only used for dragrace we don't have a failsafe. But for every event, i test the system for correct working. We drive with a ...

WM injection works great to reduce the ait. My supercharged c20xe without fmi has no controller for the WM Injection. Just a boost sensor on it. @ 0.5 Bar we start the pump and 2x 250cc W/M is injected before the charger. The AIT is reduced with about 30-35 degrees celcius But i talked to my tuner. ...

Hello, my name is Marcel, I'm from holland and some of you will know the site: http://www.corsa-novatuning.com Togheter with a friend of mine are we the owners of that site. This topic is an overview of the last three years, May a copy of some other posts on a forum so sometimes the timelines are no...

MarcoV6T wrote:Hi guys, yeah I found this forum a few days ago also, but there wasn't much animation

If the other forum doesn’t wake-up(which probably will be the case), we’ll stick here I guess.

already got some new firmware updates marc?
haha

also found this forum through google.
There was a lot of data in the other forum.

I hope that there is somewhere a backup or something.