Thanks Stevie,
I managed to fabricate a linkage arm that I fixed to the pedal via control rod, forgot to take photos and located under the seat. Seems to work ok but will see how long it lasts when I finally get the car going properly
Search found 54 matches
- Sat Apr 25, 2020 8:55 am
- Forum: Sensors, Inputs, and Outputs
- Topic: Electronic throttle actuator
- Replies: 9
- Views: 7470
- Sat Apr 25, 2020 8:23 am
- Forum: Sensors, Inputs, and Outputs
- Topic: Wheel speed sensors
- Replies: 6
- Views: 5514
Wheel speed sensors
Good afternoon, I have spent a few days messing about and learning how to use my scope and trying to get a decent wheel sensor output as could not get it right.... I have Rover MGTF reluctor rings which I have removed every other tooth to get the max number of pulses right to input into my DTA P8 Pr...
- Sun Mar 01, 2020 4:35 am
- Forum: Sensors, Inputs, and Outputs
- Topic: Electronic throttle actuator
- Replies: 9
- Views: 7470
Re: Electronic throttle actuator
Thanks Rob,
Think I will have to look at some kind of linkage arm arrangement to be able to fit a heavy return spring
Think I will have to look at some kind of linkage arm arrangement to be able to fit a heavy return spring
- Sat Feb 29, 2020 5:11 pm
- Forum: Sensors, Inputs, and Outputs
- Topic: MSD coil pack
- Replies: 43
- Views: 28495
Re: MSD coil pack
Thanks Alex, will leave that one there as seems to be working well
- Sat Feb 29, 2020 5:10 pm
- Forum: Sensors, Inputs, and Outputs
- Topic: Electronic throttle actuator
- Replies: 9
- Views: 7470
Re: Electronic throttle actuator
Thanks Alex, It is a P8 Pro and reading through the the manual, under the electronic pedal settings it states the below.. "These settings act as a safety feature for an external throttle actuator. It works by having two potentiometers, one on the pedal and one on the butterfly. These are consta...
- Sat Feb 29, 2020 2:50 pm
- Forum: Sensors, Inputs, and Outputs
- Topic: Electronic throttle actuator
- Replies: 9
- Views: 7470
Electronic throttle actuator
Good evening, Does anyone have any experience with fitting a Jenvey electric throttle actuator and a P8 Pro ECU. I am having issues with my throttle cable set up to Jenvey throttle bodies and considering the above. Assuming that the TPS on the throttle bodies, fit one to throttle pedal and one fitte...
- Sat Feb 29, 2020 1:56 pm
- Forum: Sensors, Inputs, and Outputs
- Topic: MSD coil pack
- Replies: 43
- Views: 28495
Re: MSD coil pack
Well after another couple of weeks of head scratching and frustration.... The engine would not run properly, double checked and reset cam timing and valve lifts amongst others, then engine started ,but could not seem to get it to run very well, long story short I went back through the maps I had loa...
- Tue Feb 18, 2020 2:49 pm
- Forum: Sensors, Inputs, and Outputs
- Topic: MSD coil pack
- Replies: 43
- Views: 28495
Re: MSD coil pack
Thank you, appreciate your help and learning all the time
- Sun Feb 16, 2020 6:43 am
- Forum: Sensors, Inputs, and Outputs
- Topic: MSD coil pack
- Replies: 43
- Views: 28495
Re: MSD coil pack
Just out of interest what are the gains from running non sequential over sequential....as trying to get my head around why you would want all the injectors injecting out of phase to their respective cylinders? sorry if that's a stupid question
- Sun Feb 16, 2020 6:27 am
- Forum: Sensors, Inputs, and Outputs
- Topic: MSD coil pack
- Replies: 43
- Views: 28495
Re: MSD coil pack
Thanks Stevie,
Will change things around a bit pin wise and give it a go
Will change things around a bit pin wise and give it a go