Search found 214 matches
- Fri Jul 20, 2018 8:50 am
- Forum: Sensors, Inputs, and Outputs
- Topic: MAP Sensor
- Replies: 9
- Views: 9705
Re: MAP Sensor
just a heads up on bosch 4 wire combined temp and pressure, 99% the pin numbers are wrong on cases. so the data sheet will be numbered left to right and the sensor will be numbered right to left! i have wired them the wrong way round more than once!!
- Wed Jul 11, 2018 5:09 am
- Forum: Tuning -- Tips and Tricks
- Topic: Twin-spark misfires under boost - ECU power?
- Replies: 48
- Views: 77087
Re: Twin-spark misfires under boost - ECU power?
I'm guessing that the ford coil pack is a wasted spark unit? ie the spark travels from one side of the coil to a spark plug through the engine to the other spark plug back to the coil? this is how the wasted spark coils I have used before have worked.... if this is the case having 2 coils firing at ...
- Sun Jun 17, 2018 2:53 pm
- Forum: Sensors, Inputs, and Outputs
- Topic: Oil pressure sensor.
- Replies: 14
- Views: 13791
- Thu Jul 06, 2017 3:07 am
- Forum: General
- Topic: Trying to run S40 on twin injectors
- Replies: 11
- Views: 11654
Re: Trying to run S40 on twin injectors
correct me if I'm wrong but an s40 has 2 injector outputs? so it can run semi-sequential or twin injector, not both!
what made you think it would make more power? a well set up set of carbs are just as good as EFI on wide open throttle......
what made you think it would make more power? a well set up set of carbs are just as good as EFI on wide open throttle......
- Sat Apr 01, 2017 10:16 am
- Forum: Sensors, Inputs, and Outputs
- Topic: HELP... 50mm trigger wheel not working on bike
- Replies: 27
- Views: 23327
Re: HELP... 50mm trigger wheel not working on bike
I have done a fair few bikes, hears what I have learned...... 24-1 is about the best you can hope for (from a DTA ecu), the poll of the sensor needs to be smaller than the gaps, the teeth should be the same size as the gaps. gaps should be at least as deep as they are wide, except the extra gap, tha...
- Tue Jan 31, 2017 2:13 pm
- Forum: Sensors, Inputs, and Outputs
- Topic: Dual wideband lambda controllers
- Replies: 4
- Views: 5389
Re: Dual wideband lambda controllers
you could use a spare output from the ecu to pass the 0-5v through to the gauge, filter cap and a pull-up resistor and you should be good to go.
- Thu Dec 08, 2016 10:54 am
- Forum: General
- Topic: Launch Control on S60 hard to use?
- Replies: 12
- Views: 14160
Re: Launch Control on S60 hard to use?
i have never used traction or launch control with DTA, but it strikes me as odd that you would need it in a formula student car, after all you have what 80BHP and 250kg?
- Sat Oct 22, 2016 12:47 pm
- Forum: Software, Firmware, and Data Logging
- Topic: DTASwin rewrite
- Replies: 149
- Views: 172194
Re: DTASwin rewrite
of corse it won't catch everything Stevie, it was just something that was fresh in my mind! and they were good lines, just badly re-routed after a change of filter! this stuff would of corse be easy on a massive car with loads of room to put stuff! :P Alex, that display looks much better than the ol...
- Fri Oct 21, 2016 6:42 am
- Forum: Software, Firmware, and Data Logging
- Topic: DTASwin rewrite
- Replies: 149
- Views: 172194
Re: DTASwin rewrite
as an addition to that, a fuel pressure trip would be nice, something to detect sudden drops in fuel pressure (like a pipe bursting) and should shut the fuel pump off.
this saved me at Snetterton a few weeks ago!
this saved me at Snetterton a few weeks ago!
- Wed Sep 07, 2016 1:04 pm
- Forum: Classifieds - Buy and Sell
- Topic: dyno box for sale
- Replies: 6
- Views: 9301
Re: dyno box for sale
yes i do! make me an offer!