Tried another laptop:
*Set com parameters:COM4, 9600 bauds-->OK
*STATUS -->All is ok
*LOAD MONITOR-->OK
*LOAD HEXFILE:C:\Users\Sonny\Desktop\S60.hex-->OK
*FILE INFO FOR FILE:S60.hex
Size = 120520 bytes.
Programming time = 126 s.
Block(s): 0, 1, 2, 3, 4
*PROGRAM FLASH MEMORY -->OK
Search found 7 matches
- Fri Jan 11, 2013 4:58 am
- Forum: Software, Firmware, and Data Logging
- Topic: Flashing DTA S-Series
- Replies: 77
- Views: 303925
- Thu Jan 10, 2013 1:20 pm
- Forum: Software, Firmware, and Data Logging
- Topic: Flashing DTA S-Series
- Replies: 77
- Views: 303925
Re: Flashing DTA S-Series
Thanks for all the reply's.
@ Stevieturbo.
I reliably connect with the same adapter to the ECU witch DTASWIN. I Don't have a computer with a serial convertor.
I will take a few more tries tomorrow
@ Stevieturbo.
I reliably connect with the same adapter to the ECU witch DTASWIN. I Don't have a computer with a serial convertor.
I will take a few more tries tomorrow
- Thu Jan 10, 2013 7:54 am
- Forum: Software, Firmware, and Data Logging
- Topic: Flashing DTA S-Series
- Replies: 77
- Views: 303925
Re: Flashing DTA S-Series
The fuel pomp doesn't prime so that must be good.
It must be something else then.... I use:
Windows 7
Flash Program form DTA site
USB tot COM convertor
It must be something else then.... I use:
Windows 7
Flash Program form DTA site
USB tot COM convertor
- Thu Jan 10, 2013 4:39 am
- Forum: Software, Firmware, and Data Logging
- Topic: Flashing DTA S-Series
- Replies: 77
- Views: 303925
Re: Flashing DTA S-Series
Ok so it must be
1. Connect pin 8 & 13 on the ECU side
2. Turn on ECU
3. Disconnect pin 8 &13
4. Start op Flash program
5. Connect to ECU with flash program
1. Connect pin 8 & 13 on the ECU side
2. Turn on ECU
3. Disconnect pin 8 &13
4. Start op Flash program
5. Connect to ECU with flash program
- Thu Jan 10, 2013 12:41 am
- Forum: Software, Firmware, and Data Logging
- Topic: Flashing DTA S-Series
- Replies: 77
- Views: 303925
Re: Flashing DTA S-Series
No i don't have a flash cable so this is what i did:
Turn on Ecu, en then wire pin 8 and 13 to echother , en then release them again.
Turn on Ecu, en then wire pin 8 and 13 to echother , en then release them again.
- Wed Jan 09, 2013 11:12 am
- Forum: Software, Firmware, and Data Logging
- Topic: Flashing DTA S-Series
- Replies: 77
- Views: 303925
Re: Flashing DTA S-Series
When i try to flash i get this error:
*LOAD MONITOR-->ERROR
Description: InitMonitor failed.
Monitor: BSL: Fail before sending all the 0x20 first bytes.
Com: Receive: Timeout or Lost of data
Can someone please tel me what to do?
*LOAD MONITOR-->ERROR
Description: InitMonitor failed.
Monitor: BSL: Fail before sending all the 0x20 first bytes.
Com: Receive: Timeout or Lost of data
Can someone please tel me what to do?
- Wed Jan 09, 2013 6:49 am
- Forum: Software, Firmware, and Data Logging
- Topic: Alternative DTA dash
- Replies: 45
- Views: 61081
Re: Alternative DTA dash
Great post
@g60luke: How can i contact you? Iám interested in a display for my car
@g60luke: How can i contact you? Iám interested in a display for my car