DTAForum.com - a forum for the DTA ECU

I have an STC DBW ECU for sale

£250

Nice one Andy.

Thanks Alex,

Ok, thinking about it, it might be the 5v that i have got mixed up. That needs to come from the ecu into the STC?

I have connected the ECU and the STC to my laptop now and have both softwares open at the same time. I have ticked the "DTA throttle controller fitted?" which then automatically ticked the box "electronic pedal safety check enabled" in the ecu software. I haven't connected a cabl...

Hi Andy,

My understanding for reverse is that you can add a non latching button to press when you need to select neutral / reverse.

Alex DTA wrote:Have you turned on the Electronic Pedal settings in the ECU?
The ECU won't try to communicate with the STC unless that is turned on.

Hmmm I thought I had. I will check again at the weekend. thanks Alex.

You can connect to the STC and sort all the basic settings without the CAN connected, but the throttle won't operate until it sees an ECU over the CAN connection. Hi Alex, I have sorted the laptop and it can now connect to the STC. So i have powered up the ecu and connected the CAN H & CAN L to...

Brilliant, thank you Alex.

I might be back to ask for help with basic settings to get going.

Thanks Stevie. I downloaded the latest drivers for the adaptor as well, but it still wasn’t having any of it.

I didn’t connect the STC can bus to the ecu, will this still allow us to step up the parameters in the stc software or will it stop stc working correctly?

Well, i have finally wired up all the bits today, but my laptop with Windows 10 won't connect to the STC controller, but my mates toughbook with RS232 and windows 7 it can connect.

Is this because i have windows 10?

Thanks

Paul