DTAForum.com - a forum for the DTA ECU

been in hospital aft racing

been7 week in hospital but recovery is slow. Still want a unit from u although i wont be racing anymore. Will be in hospital for another 4 weeks or so
don

each to their own opinion. As far as I am concerned.....CASE CLOSED

Steve is always there for help and advice even if the questions are somewhat stupid.
He has helped me in the past and I great full for his help.
Sorry tav, U might just end up eating your own words.

This is not a forum to slag, run people down or make comments about their supposed knowledge

What fuel pump set ups are U using. Had a similar problem and did manage to spot the fuel pressure gauge drop when it seemed to bog down. Sorted that problem by fitting a low pressure high volume pump close to the tank. This pump fed a swirl pot and had a return line to the main tank. A high pressur...

If the Sequential injection and fan controls config is set with "Sequential Active" set to NO which is the configuration of the actual engine Im using and then I try to set in the "Camshaft Control Parameters" and the option "Cam Advance Control On" to active I get the ...

Thanks to all for all the ideas and comments

Im trying to get the cam advance on my Nissan SR20VE sorted out. It is fitted a S60 and trigger wheel with 1 crank sensor instead of the usual Nissan CAS unit. Its set up for non sequential firing [ twin spark ] so I cant use the "VTEC" type set up as it requires it to be in a sequential m...

Dyno done for Nissan SR20VE
Does not have cam advance

I have fitted a launch switch on to my clutch so the switch is in a closed position when clutch is depressed. Is there any way to use this switch [which is connected to pin 4 of the sensor plug] to enable a 2 step control [basically a soft rev limiter but manually controlled] as class regulations wo...

edit2: i can live with the country - but that's *it*...

Thats why I said that .......could be done with dropdown boxes for countries" and maybe the area in that country could be an optional box."