Hi all just a quick one
In comp Baro settings it in % for timing For eg in my main ing table if i have 30 degrees on full load at 27 psi and at 27 psi in baro it says -3 is that - 3% of 30 degrees at 27 psi so 27 degrees advance?
Thanks
Search found 13 matches
- Sat Aug 29, 2020 5:16 pm
- Forum: Tuning -- Tips and Tricks
- Topic: Comp Baro
- Replies: 1
- Views: 3348
- Thu Aug 27, 2020 2:40 pm
- Forum: Tuning -- Tips and Tricks
- Topic: Mac Turbo Valve
- Replies: 5
- Views: 5106
Re: Mac Turbo Valve
Brill Thanks for the info Rob. My ecu set up using psi not kpa so i have put my top row at 0-40 psi. Im right in saying that 27 psi on that row will equate to the 12 pounds my engine is seeing over atmespheric right? If this is correct i should allow the solenoid to bleed off there as a start and sl...
- Tue Aug 25, 2020 2:53 pm
- Forum: Tuning -- Tips and Tricks
- Topic: Mac Turbo Valve
- Replies: 5
- Views: 5106
Re: Mac Turbo Valve
So would i maybe best fitting a 7 pound spring and keep upping the duty to reach my 12 pounds im running now to ensure the valve responds ok then move up with better control? In the PWM table is it as simple as 0 To 100% to fill out each box? Does anyone have a screen shot of an example of this plea...
- Mon Aug 24, 2020 3:11 pm
- Forum: Tuning -- Tips and Tricks
- Topic: Mac Turbo Valve
- Replies: 5
- Views: 5106
Mac Turbo Valve
Right this may have been answered many times but it seems complicated for what it is. Im as it stands using a Tial External waste gate at 12 pounds of boost, Spring pressure. Now i only drag race so I'm only interested in wot. I have a mac valve connected to the ecu but never used it, I only have tu...
- Sun Aug 23, 2020 3:39 pm
- Forum: Sensors, Inputs, and Outputs
- Topic: Fuel Pressure sensor
- Replies: 11
- Views: 7499
Re: Fuel Pressure sensor
Yes Rob that is all i was asking.
My fuel pressure rises on boost. Thats all working as it should. All i was saying what protection is there against the possible failure of loosing fuel presure.
cheers for info
My fuel pressure rises on boost. Thats all working as it should. All i was saying what protection is there against the possible failure of loosing fuel presure.
cheers for info
- Fri Aug 21, 2020 4:04 pm
- Forum: Sensors, Inputs, and Outputs
- Topic: Fuel Pressure sensor
- Replies: 11
- Views: 7499
Re: Fuel Pressure sensor
Ok thanks for advice ill grab one of the website
Is it simply to set up? I run 42 psi stock rising on boost so can i set ecu to shut down say 40 psi or lower? Thanks
Is it simply to set up? I run 42 psi stock rising on boost so can i set ecu to shut down say 40 psi or lower? Thanks
- Thu Aug 20, 2020 3:53 pm
- Forum: Sensors, Inputs, and Outputs
- Topic: Fuel Pressure sensor
- Replies: 11
- Views: 7499
Fuel Pressure sensor
Easy quick one guys, has anyone got a link to a Fuel pressure sensor that works well with a s60 Thanks
- Mon Jun 22, 2020 11:16 am
- Forum: Tuning -- Tips and Tricks
- Topic: Starting Idle
- Replies: 5
- Views: 5767
Re: Starting Idle
Hi all Thanks for replys.
My warm idle is at 10 degrees BTDC so will is there places to change this in idle control settings. Sorry away from pc
Thanks
My warm idle is at 10 degrees BTDC so will is there places to change this in idle control settings. Sorry away from pc
Thanks
- Mon Jun 22, 2020 2:13 am
- Forum: Tuning -- Tips and Tricks
- Topic: Starting Idle
- Replies: 5
- Views: 5767
Starting Idle
Hi all Just a question but is there a way of rasing the idle rpm a little bit on start up. Once its warm its got a perfect idle it just sounds like it needs a little help from cold. I dont have a idle control valve its just running 4 TBs. It starts well from the cold start map. Sorry if thisnis a st...
- Sun Sep 01, 2019 2:36 pm
- Forum: Tuning -- Tips and Tricks
- Topic: Mapping Help with Dyno
- Replies: 3
- Views: 4522
Mapping Help with Dyno
Hello chaps
Can anybody lead me in the right direction of somebody who knows DTA inside out and has a dyno?
Im from Kent
This is for My Gokart I'm after a complete check over of the map really as im unsure if its set up correctly.
Be nice to get the turbo valve set up as well
Thank you
Ollie
Can anybody lead me in the right direction of somebody who knows DTA inside out and has a dyno?
Im from Kent
This is for My Gokart I'm after a complete check over of the map really as im unsure if its set up correctly.
Be nice to get the turbo valve set up as well
Thank you
Ollie