DTAForum.com - a forum for the DTA ECU

Hi all just a quick one
In comp Baro settings it in % for timing For eg in my main ing table if i have 30 degrees on full load at 27 psi and at 27 psi in baro it says -3 is that - 3% of 30 degrees at 27 psi so 27 degrees advance?
Thanks

Brill Thanks for the info Rob. My ecu set up using psi not kpa so i have put my top row at 0-40 psi. Im right in saying that 27 psi on that row will equate to the 12 pounds my engine is seeing over atmespheric right? If this is correct i should allow the solenoid to bleed off there as a start and sl...

So would i maybe best fitting a 7 pound spring and keep upping the duty to reach my 12 pounds im running now to ensure the valve responds ok then move up with better control? In the PWM table is it as simple as 0 To 100% to fill out each box? Does anyone have a screen shot of an example of this plea...

Right this may have been answered many times but it seems complicated for what it is. Im as it stands using a Tial External waste gate at 12 pounds of boost, Spring pressure. Now i only drag race so I'm only interested in wot. I have a mac valve connected to the ecu but never used it, I only have tu...

Yes Rob that is all i was asking.
My fuel pressure rises on boost. Thats all working as it should. All i was saying what protection is there against the possible failure of loosing fuel presure.
cheers for info

Ok thanks for advice ill grab one of the website

Is it simply to set up? I run 42 psi stock rising on boost so can i set ecu to shut down say 40 psi or lower? Thanks

Easy quick one guys, has anyone got a link to a Fuel pressure sensor that works well with a s60 Thanks

Hi all Thanks for replys.
My warm idle is at 10 degrees BTDC so will is there places to change this in idle control settings. Sorry away from pc
Thanks

Hi all Just a question but is there a way of rasing the idle rpm a little bit on start up. Once its warm its got a perfect idle it just sounds like it needs a little help from cold. I dont have a idle control valve its just running 4 TBs. It starts well from the cold start map. Sorry if thisnis a st...

Hello chaps

Can anybody lead me in the right direction of somebody who knows DTA inside out and has a dyno?
Im from Kent

This is for My Gokart I'm after a complete check over of the map really as im unsure if its set up correctly.
Be nice to get the turbo valve set up as well

Thank you
Ollie